ZyXEL Communications P-660HN-51 - 16.3 The Dynamic DNS Screen

Chapter 16 Dynamic DNS Setup
P-660HN-51 User’s Guide
173
Figure 92 DNS Entry: Add/Edit
The following table describes the labels in this screen.
16.3 The Dynamic DNS Screen
Use this screen to change your Zyxel Device’s DDNS. Click Advanced > DNS Setting > Dynamic DNS. The
screen appears as shown.
Figure 93 Advanced > DNS Setting > Dynamic DNS
The following table describes the fields in this screen.
Table 68 DNS Entry: Add/Edit
LABEL DESCRIPTION
Host Name Enter the host name of the DNS entry.
IP Address Enter the IP address of the DNS entry.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 69 Advanced > DNS Setting > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS Select this check box to use dynamic DNS.
Service Provider Select your Dynamic DNS service provider from the drop-down list box.
Hostname Type the domain name assigned to your Zyxel Device by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
User Name Type your user name.
Password Type the password assigned to you.