ZyXEL Communications P-660HN-51 - 6.8 The Wireless Others Screen

Chapter 6 Wireless
P-660HN-51 User’s Guide
75
6.7.1 WDS Scan
You can click the Scan icon in Wireless > WDS to have the Zyxel Device automatically search and
display the available APs within range. Select an AP and click Apply to have the Zyxel Device establish
a wireless link with the selected wireless device.
Figure 27 WDS: Scan
The following table describes the labels in this screen.
6.8 The Wireless Others Screen
Use this screen to configure advanced wireless settings. Click Network Settings > Wireless > Others. The
screen appears as shown.
See Section 6.9.2 on page 79 for detailed definitions of the terms listed in this screen.
Table 19 WDS: Scan
LABEL DESCRIPTION
Wireless Bridge Scan Setup
Refresh Click Refresh to update the table.
# This is the index number of the entry.
SSID This shows the SSID of the available wireless device within range.
BSSID This shows the MAC address of the available wireless device within range.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.