Chapter 28 Configuration
P-660HN-51 User’s Guide
220
Figure 123 Reset Warning Message
Figure 124 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your Zyxel Device.
Refer to Section 1.7 on page 18 for more information on the RESET button.
28.3 The Reboot Screen
System restart allows you to reboot the Zyxel Device remotely without turning the power off. You may
need to do this if the Zyxel Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the Zyxel Device reboot. This does not affect the
Zyxel Device's configuration.
Figure 125 Maintenance > Reboot
To Next Page
Loading...
