P-660HN-51 User’s Guide
59
CHAPTER 6
Wireless
6.1 Overview
This chapter describes the Zyxel Device’s Network Settings > Wireless screens. Use these screens to set up
your Zyxel Device’s wireless connection.
6.1.1 What You Can Do in this Chapter
This section describes the Zyxel Device’s Wireless screens. Use these screens to set up your Zyxel Device’s
wireless connection.
• Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless security
mode (Section 6.2 on page 60).
• Use the More AP screen to set up multiple wireless networks on your Zyxel Device (Section 6.3 on page
67).
• Use the MAC Authentication screen to allow or deny wireless clients based on their MAC addresses
from connecting to the Zyxel Device (Section 6.4 on page 70).
• Use the WPS screen to enable or disable WPS, view or generate a security PIN (Personal Identification
Number) (Section 6.5 on page 71).
• Use the WMM screen to enable Wi-Fi MultiMedia (WMM) to ensure quality of service in wireless
networks for multimedia applications (Section 6.6 on page 72).
• Use the WDS screen to set up a Wireless Distribution System, in which the Zyxel Device acts as a bridge
with other Zyxel access points (Section 6.7 on page 73).
• Use the Others screen to configure wireless advanced features, such as the RTS/CTS Threshold
(Section 6.8 on page 75).
To Next Page
Loading...
