ZyXEL Communications P-660HN-51 - Add a Protocol

Chapter 10 Firewall
P-660HN-51 User’s Guide
129
Figure 59 Security Settings > Protocol
The following table describes the labels in this screen.
10.3.1 Add a Protocol
Use this screen to add a customized rule. Click Add New Protocol Entry in the Protocol screen to display
the following screen.
Figure 60 Protocol: Add
Table 40 Security Settings > Protocol
LABEL DESCRIPTION
Add New
Protocol Entry
Click this to add a new protocol.
Name This is the name of your customized service.
Description This is the description of your customized service.
Ports/Protocol
Number
This shows the port number or range and IP protocol (TCP, UDP or TCP/UDP) that defines
your customized service
Remove Click the Delete icon to remove this entry.