ZyXEL Communications P-660HN-51 - CHAPTER 9 MAC Filter; 9.1 Overview; 9.2 The MAC Filter Screen

P-660HN-51 User’s Guide
124
CHAPTER 9
MAC Filter
9.1 Overview
This screen allows you to configure the Zyxel Device to give exclusive access to specific devices or
exclude specific devices from accessing the Zyxel Device. Every Ethernet device has a unique MAC
(Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses of the
devices to configure this screen.
9.2 The MAC Filter Screen
Use this screen to change your Zyxel Device’s MAC filter settings. Click Security Settings > MAC Filter. The
screen appears as shown.
Figure 56
Security Settings > MAC Filter
The following table describes the labels in this screen.
Table 38
Security Settings > MAC Filter
LABEL DESCRIPTION
MAC Filter Setup
MAC Filter Select Enable to activate the MAC filter function. Otherwise, select Disable.