P-660HN-51 User’s Guide
193
CHAPTER 18
TR-069 Client
18.1 Overview
This chapter explains how to configure the Zyxel Device’s TR-069 auto-configuration settings
18.2 The TR-069 Clients Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your Zyxel Device, can be
managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending Remote
Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible Markup
Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the Zyxel Device, modify settings, perform firmware
upgrades as well as monitor and diagnose the Zyxel Device. You have to enable the device to be
managed by the ACS and specify the ACS IP address or domain name and username and password.
Click Advanced > TR-069 Clients to open the following screen. Use this screen to configure your Zyxel
Device to be managed by an ACS.
Figure 102 Advanced > TR-069 Clients
To Next Page
Loading...
