ZyXEL Communications P-660HN-51 - 2.2.3 Navigation Panel

Chapter 2 The Web Configurator
P-660HN-51 User’s Guide
22
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure Zyxel Device features. The
following tables describe each menu item.2
Table 2 Navigation Panel Summary
LINK TAB FUNCTION
Network Map This screen shows the network status of the Zyxel Device and computers/
devices connected to it.
Network Settings
Broadband Broadband Use this screen to view and configure ISP parameters, WAN IP address
assignment, and other advanced properties. You can also add new WAN
connections.
Wireless General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP Use this screen to configure multiple BSSs on the Zyxel Device.
MAC
Authentication
Use this screen to block or allow wireless traffic from wireless devices of certain
SSIDs and MAC addresses to the Zyxel Device.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected Setup)
settings.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
WDS Use this screen to set up Wireless Distribution System (WDS) links to other
access points.
Others Use this screen to configure advanced wireless settings.
Home
Networking
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC addresses.
UPnP Use this screen to enable the UPnP function.
NAT Port Forwarding Use this screen to make your local servers visible to the outside world.
Applications Use this screen to configure servers behind the Zyxel Device.
Port Triggering Use this screen to change your Zyxel Device’s port triggering settings.
DMZ Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Sessions Use this screen to limit the number of NAT sessions all clients can establish.
Security Settings
MAC Filter MAC Filter Use this screen to configure the Zyxel Device to give exclusive access to
specific devices or exclude specific devices from accessing the Zyxel Device.
Firewall General Use this screen to configure the security level of your firewall.
Protocol Use this screen to add or remove predefined Internet services and configure
firewall rules.
Access Control Use this screen to enable specific traffic directions for network services.
Remote MGMT Remote MGMT Use this screen to enable specific traffic directions for network services.
Certificates Local Certificates Use this screen to view a summary list of certificates and manage certificates
and certification requests.
Trusted CA
Use this screen to view and manage the list of the trusted CAs.
IPSec VPN Status Use this screen to view the status of IPSec tunnels.
Settings Use this screen to add and configure IPSec tunnels.