ZyXEL Communications P-660HN-51 - 7.4 The UPnP Screen

Chapter 7 Home Networking
P-660HN-51 User’s Guide
96
If you click Add new static lease in the Static DHCP screen or the Edit icon next to a static DHCP entry,
the following screen displays.
Figure 39 Static DHCP: Add/Edit
The following table describes the labels in this screen.
7.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a
device can leave a network smoothly and automatically when it is no longer in use.
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN (Local Area
Network) is unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that
is assigned at the factory. This address follows an industry standard that ensures no
other adapter has a similar address.
IP Address This field displays the IP address relative to the # field listed above.
Modify Click the Edit icon to have the IP address field editable and change it.
Click the Delete icon to delete a static DHCP entry. A window displays asking you to
confirm that you want to delete the selected entry.
Table 25 Static DHCP: Add/Edit
LABEL DESCRIPTION
Active Select this check box to activate the Static DHCP function.
Select Device Info If you select Manual Input, you can manually type in the MAC address and IP
address of a computer on your LAN. You can also choose the name of a computer
from the drop list and have the MAC Address and IP Address auto-detected.
MAC Address If you select Manual Input in the Select Device Info field, enter the MAC address of a
computer on your LAN.
IP Address If you select Manual Input in the Select Device Info field, enter the IP address that
you want to assign to the computer on your LAN with the MAC address that you will
also specify.
Apply
Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 24 Network Settings > Home Networking > Static DHCP (continued)
LABEL DESCRIPTION