P-660HN-51 User’s Guide
28
CHAPTER 4
Tutorials
4.1 Overview
This chapter shows you how to use the Zyxel Device’s various features.
• Setting Up Your DSL Connection Using PPPoE, see page 28
• Setting Up a Secure Wireless Network, see page 31
• Setting Up Multiple Wireless Groups, see page 37
• Configuring Static Route for Routing to Another Network, see page 41
• Access the Zyxel Device Using DDNS, see page 43
4.2 Setting Up Your DSL Connection Using PPPoE
This tutorial shows you how to set up your Internet connection using the Web Configurator.
If you connect to the Internet through a DSL connection, use the information from your Internet Service
Provider (ISP) to configure the Zyxel Device. Be sure to contact your service provider for any information
you need to configure the Broadband screens.
1 Click Network Settings > Broadband to open the following screen. Click Add new WAN Interface.
2 In this example, the DSL connection has the following information.
General
Connection Name MyDSLConnection
Connection Mode Routing
Encapsulation PPPoE
ATM PVC Configuration
VPI/VCI 36/48
Encapsulation Mode LLC/SNAP-Bridging
Service Category UBR without PCR
To Next Page
Loading...
