Chapter 4 Tutorials
P-660HN-51 User’s Guide
29
3 Select the Active check box. Enter the General and ATM PVC Configuration settings as provided above.
Choose the Encapsulation specified by your DSL service provider. For this example, the service provider
requires a username and password to establish Internet connection. Therefore, select PPPoE as the WAN
encapsulation type.
4 Enter the account information provided to you by your DSL service provider.
5 Configure this rule as your default Internet connection by selecting the Apply as Default Gateway check
box. Then select DNS as Static and enter the DNS server addresses provided to you, such as
192.168.1.254
(DNS server1)/192.168.1.253 (DNS server2).
6 Click Apply to save your settings.
Account Information
PPP User Name 1234@DSL-Ex.com
PPP Password ABCDEF!
PPPoE Service Name My DSL
Static IP Address 192.168.1.32
Others PPPoE Passthrough: Disabled
NAT: Enabled
IGMP Multicast Proxy: Enabled
Apply as Default Gateway: Enable
Static DNS: Server 1: 192.168.1.254
Server 2: 192.168.1.253
To Next Page
Loading...
