ZyXEL Communications P-660HN-51 - 22.2 The System Log Screen

Chapter 22 Logs
P-660HN-51 User’s Guide
202
22.2 The System Log Screen
Use the System Log screen to see the system logs for the categories that you select. Click System Monitor
> Log to open the System Log screen.
Figure 108 System Monitor > Log > System Log
The following table describes the fields in this screen.
4 Warning: There is a warning condition on the system.
5 Notice: There is a normal but significant condition on the system.
6 Informational: The syslog contains an informational message.
7 Debug: The message is intended for debug-level purposes.
Table 86 Syslog Severity Levels
CODE SEVERITY
Table 87 System Monitor > Log > System Log
LABEL DESCRIPTION
Display Select a severity level from the drop-down list box. This filters search results according
to the severity level you have selected. When you select a severity, the Zyxel Device
searches through all logs of that severity or higher.
Clear Log Click this to delete all the logs.
Refresh Click this to renew the log screen.
Export Log Click this to export the selected log(s).
Email Log Now Click this to send the log file(s) to the E-mail address you specify in the Maintenance >
Logs Setting screen.
WAN DHCP Log