Chapter 2 The Web Configurator
P-660HN-51 User’s Guide
23
Parental
Control
Parental Control Use this screen to block web sites with the specific URL.
Advanced
Routing Routing Use this screen to view and set up static routes on the Zyxel Device.
DNS Setting DNS Entry Use this screen to view and configure DNS entries.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP address.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also configure
the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Policer Setup Use these screens to configure QoS policers.
Monitor Use this screen to view QoS packets statistics.
TR-069 Client TR-069 Client Use this screen to configure the Zyxel Device to be managed by an Auto
Configuration Server (ACS).
Time Setting Time Setting Use this screen to change your Zyxel Device’s time and date.
Scheduler Rules Scheduler Rules Use this screen to configure the days and times when a configured restriction
(such as parental control) is enforced.
Policy
Forwarding
Policy Forwarding Use this screen to configure policy routing on the Zyxel Device.
System Monitor
ARP Table ARP Table Use this screen to view the ARP table. It displays the IP and MAC address of
each DHCP connection.
Log System Log Use this screen to view the status of events that occurred to the Zyxel Device.
You can export or e-mail the logs.
Security Log Use this screen to view the login record of the Zyxel Device. You can export or
e-mail the logs.
Traffic Status WAN Use this screen to view the status of all network traffic going through the WAN
port of the Zyxel Device.
LAN Use this screen to view the status of all network traffic going through the LAN
ports of the Zyxel Device.
Maintenance
Users
Configuration
Users
Configuration
Use this screen to add and configure user accounts on the Zyxel Device.
Logs Setting Logs Setting Use this screen to select which logs and/or immediate alerts your device is to
record. You can also set it to e-mail the logs to you.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your device.
Configuration Configuration Use this screen to backup and restore your device’s configuration (settings) or
reset the factory default settings.
Reboot Reboot Use this screen to reboot the Zyxel Device without turning the power off.
Diagnostic Ping &
TraceRoute &
NsLookup
Use this screen to identify problems with the DSL connection. You can use
Ping, TraceRoute, or Nslookup to help you identify problems.
OAM Ping Use this screen to send an ATM OAM (Operation, Administration and
Maintenance) packet to verify the connectivity of a specific PVC.
Table 2 Navigation Panel Summary (continued)
LINK TAB FUNCTION
To Next Page
Loading...
