Chapter 11 Remote Management
P-660HN-51 User’s Guide
135
The following table describes the fields in this screen.
Table 44 Security Settings > Service Control
LABEL DESCRIPTION
General
# This is the index number of the entry.
Services Name This is the service you may use to access the Zyxel Device.
LAN Select the Enable check box for the corresponding services that you want to allow
access to the Zyxel Device from the LAN.
WAN Select the Enable check box for the corresponding services that you want to allow
access to the Zyxel Device from the WAN.
Port You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Certificate
HTTPS Certificate Select a certificate the HTTPS server (the Zyxel Device) uses to authenticate itself to
the HTTPS client. You must have certificates already configured in the Certificates
screen.
Apply Click Apply to save your changes back to the Zyxel Device.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...
