P-660 series Support Notes
c A tion= Enable Dial-on-demand
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Start date of this
Start Date
schedule rule. It can be unmatched with weekday setting. For
example, if Start Date is 2000/10/02(Monday), but Monday setting in weekday
can be No.
How Often
If once is selected, all weekday settings will ne marked as N/A. After the rule
is completely, it will be deleted automatically.
Forced On
The node will always keep up during the setting period. It is equivalent to
diable the idel timeout.
Forced Down
The node will always keep doen during the setting period. The connected
remote node will be dropped.
Enable
Dial-On-Demand
The remote node accepts Di l-on-demand during this period. a
Dis e
mote node denies any demand dial during the period. For the existing
abl
The re
Dial-On-Demand
connected nodes, it will be dropped after idle timeout and no triggered up.
Start Time/
Duration
Start Time and Duration of this schedule
.
• Apply the schedule to the Remote node
Multiple scheduling rules can program in a Remote node, and they have priority. For
example, if we program the sets as 1,2,3,4 in remote node, then the set 1 will overrid
set 2,3,4. set 2 will override 3,4, and so on.
e
Menu 11.1 - Remote Node Profile
Rem Node Name= CHT Route= IP
Active= Yes Bridge= No
Encapsulation= PPPoE Edit IP/Bridge= No
Multiplexing= LLC-based Edit ATM Options= No
Ser Edit Advance Options= No vice Name= N/A
Incoming: Telco Option:
R Allocated Budget(min)= 0 em Login= N/A
Rem Password= N/A Period(hr)= 0
Outgoing: Schedule Sets= 1, 2, 3, 4
My Login= cso@hinet.net Nailed-Up Connection= No
My Password= ******* Session Options:
101
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
