P-660 series Support Notes
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter log= No
PPP log= No
Configuration:
1. Active, use the space bar to turn on the syslog option.
2. Syslog IP Address, enter the IP address of the UNIX serv
the syslog.
3. Log Facility, use the space bar to toggle between the 7 di
4. Ty
er that you wish to send
fferent local options.
pes, use the space bar to toggle the logs we are going to record.
-r, t acility to receive message from the network using an
Internet domain socket with the syslog services. The default setting is not enabled.
/etc/syslog.conf by adding the following line at the end of the
/etc/syslog.conf file.
zyxel.log is the full path of the log file.
logs all data phone line activity if set to Yes.
UNIX Setup
1. Make sure that your syslog starts with -r argument.
his option will enable the f
2. Edit the file
local1.* /var/log/zyxel.log
Where /var/log/
3. Restart syslogd.
ZyXEL Syslog Message Format
CDR
Call Detail Record (CDR)
Packet
triggered
The first 48 bytes o
the UNIX syslog server
r octets and protocol type of the triggering packet is sent to
when this field is set to Yes.
Filter log
No filters ar
filter Log
e logged when this field is set to No. Filters with the individual
field set to Yes are logged when this field is set to Yes.
PPP log
PPP events are logged when this field is set to Yes.
89
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
