P-660 series Support Notes
3. MAC Filter
• MAC Filter Overview
• Configure the WLAN MAC Filter
MAC Filter Overview
d stations from accessing
the APs. ZyXEL's APs provide the capability for checking MAC address of the
ion before allowing it to connect to the network. This provides an additional layer
of control layer in that only stations with registered MAC addresses can connect. This
f MAC addresses be configured.
• ZyXEL MAC Filter Implementation
Users can use MAC Filter as a method to restrict unauthorize
stat
approach requires that the list o
ZyXEL MAC Filter Implementation
ZyXEL's MAC Filter Implementation allows users to define a list to allow or block
association from STAs. The filter set allows users to input 12 entries in the list. If
Allow Association is selected, all other STAs which are not on the list will be denied.
Otherwise, if Deny Association is selected, all other STAs which are not on the list
will be allowed for association. Users can choose either way to configure their filter
rule.
Configure the WLAN MAC Filter
related settings in ZyXEL APs are configured in menu 3.5.1, WLAN
er, you need to
dress is,
The MAC Filter
MAC Address Filter Configuration. Before you configure the MAC filt
know the MAC address of the client first. If not knowing what your MAC ad
121
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
