P-660 series Support Notes
2. Configuring Infrastructure mode
• Infrastructure Introduction
• Configure wireless access point to Infrastructure mode with SMT
• Configure wireless access point to Infrastructure mode with Web configurator
• Configure wireless station to Infrastructure mode
Infrastructure Introduction
What is Infrastructure mode?
, is an operating
mode of an 802.11b/Wi-Fi client unit. In infrastructure mode, the client unit can
associate with an 802.11b/Wi-Fi Access Point and communicate with other clients in
infrastructure mode through that access point.
Infrastructure mode, sometimes referred to as Access Point mode
t to Infrastructure mode using SMT.
To configure Infrastructure mode of your P660HW-T1 wireless AP please follow the
steps below.
1. From the SMT main menu, enter 3 to display Menu 3 ? LAN Setup.
2. Enter 5 to display Menu 3.5 ? Wireless LAN Setup.
Configure Wireless Access Poin
Menu 3.5 - Wireless LAN Setup
117
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
