P-660 series Support Notes
ESSID= Wireless
Hide ESSID= No
Channel ID= CH01 2412MHz
RTS Threshold= 0
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Edit MAC Address Filter= No
Press ENTER to Confirm or ESC to Cancel:
3. Configure ESSID, Channel ID, WEP, Default Key and Keys as you desire.
nfigurator.
1. From the e
display ?W
Configure Wireless Access Point to Infrastructure mode using Web co
To configure Infrastructure mode of your P660HW-T1 wireless AP please follow the
steps below.
w b configurator main menu, click advanced->Wireless Lanto
ireless LAN.
2. Configure the desired configuration on P660HW-T1.
118
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
