P-660 series Support Notes
. Finished.
Configuration Wireless Station to Infrastructure mode
R B-100/B-200/B-300 wireless NIC
3
To configure Infrastructure mode on your ZyAI
card please follow the following steps.
1. Double click on the utility icon in your windows task bar the utility will pop up on
your windows screen.
2. Select configuration tab.
3. Select Infrastructu
leave it as any if you wish to connect to
effect.
re from the operation mode pull down menu, fill in an SSID or
any AP than press Apply Change to take
4. Click on Site Survey tab, and press search all the available AP will be listed.
119
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
