ZyXEL Communications P-660R-T1 - WLAN Related Commands

P-660 series Support Notes
187
All contents copyright © 2005 ZyXEL Communications Corporation.
8. WLAN Related Commands
Command Description
Wlan
active [on|off] [0|1] Turn on/off wireless lan
association Show association list
load Load WLAN configuration
into buffer.
Display Display WLAN
configuration data.
chid Configure channel ID?
essid Configure ESSID
hiddenssid [on/off] Enable/Disable hidden SSID
threshold
rts <RTS threshold value> Set threshold rts value
Fragment <Fragment threshold
value>
Set threshold fragmentation
value
wep
type <none|64|128|256> Set WEP key to 64, 128 or
256 bits.
Key Set <set> <value> Set WEP key value per set
Key Default <set> Set WEP default key set
macfilter
Enable Enable macfilter
Disable Disable macfilter
Action <allow|deny> When action match, allow or
deny this mac
Set <Set#> <MAC Address> Set mac address by set
Clear Clear all WLAN
configuration data.
Save Save WLAN configuration
working buffer to Rom file.
Power [1:19dbm, 2:18dbm,
3:16dbm, 4:15dbm,
5:14dbm]
Change TX power level.
reset Reset WLAN
1130cmd Internal usage.
restart_stat Show WLAN restart statistics
chg_dot11mode Set WLAN state to mix
mode, B only or G only
show_rxDesc Show number of Rx host
descriptors