ZyXEL Communications P-660R-T1 - SMT Related Command

P-660 series Support Notes
195
All contents copyright © 2005 ZyXEL Communications Corporation.
clear Clear firewall log count.
pktdump Dump the 64 bytes of dropped
packet by firewall
update Update firewall
dynamicrule
tcprst
rst Set TCP reset sending on/off.
rst113 Set TCP reset sending for port 113
on/off.
display Display TCP reset sending setting.
icmp
dos
smtp Set SMTP DoS defender on/off
display Display SMTP DoS defender
setting.
ignore Set if firewall ignore DoS in
lan/wan/dmz/wlan
ignore
triangle Set if firewall ignore triangle route
in lan/wan/dmz/wlan
13. SMT Related command
No Command Description Comment
sys bridge [on|off] Set system bridge on/off Menu 1
sys routeip [on|off] Set system IP routing on/off Menu 1
sys hostname [hostname] Set system name Menu 1
sys display
Display hostname, routing/bridge mode
information in menu 1
Display Menu 1
sys default
Load All Default Settings Except LAN
and DHCP.
sys save
Save all the parameters which will
include menu1, menu 3.2 LAN, menu 4
or menu 11 WAN, menu 12 static route,
menu 15 NAT server set, menu 21 filter
sets, menu 22 SNMP, menu 24.11 remote
management and 3.5 Wireless LAN
wan backup mechanism [dsl | icmp]
Set wan backup mechanism to DSL link
or ICMP
Menu 2
wan backup addr [index] [IP addr] Set wan ip address <index> Menu 2
wan backup tolerance [number] Set keepalive fail tolerance Menu 2
wan backup recovery [interval(sec)] Set recovery interval Menu 2
wan backup timeout [number] Set ICMP timeout Menu 2