ZyXEL Communications P-660R-T1 - Configure an Internal Server Behind SUA

P-660 series Support Notes
2. 0 0 0.0.0.0
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
Configure an Internal Server Behind SUA
Introduction
If you wish, you can make internal servers (e.g., Web
fo
th
, ftp or mail server) accessible
r outside users, even though SUA makes your LAN appear as a single machine to
e outside world. A service is identified by the port number. Also, since you need to
specify the IP address of a server in the P-660, a server must have a fixed IP address
and tially changes each time it is
powered on.
n to the servers for specific upports a default server. A
e request that does not have a s r explicitly designated for it is forwarded to
the default server. If the default server is not defined, the service request is simply
d.
ration
outsid orld, specify the port number of the service
and the inside address of the server in 'Menu 15.2.1', Multiple Server Configuration.
not be a DHCP client whose IP address poten
In additio services, SUA s
servic erve
discarde
Configu
To make a server visible to the e w
36
All contents copyright © 2005 ZyXEL Communications Corporation.