P-660 series Support Notes
Setting up the Access Point
Mo
simulta
encryption. To set up the Access Point, you will need to set the one of the following
parameters:
o 64-bit WEP key (secret key) with 5 characters
o 128-bit WEP key (secret key) with 13 characters
o 128-bit WEP key (secret key) with 26 hexadecimal digits
o 256-bit WEP key (secret key) with 29 characters
o 256-bit WEP key (secret key) with 58 hexadecimal digits
You can set up the Access Point by SMT or Web configurator
• Setting up the Access Point from SMT Menu 3.5
P660HW-T1 hold up to 4 WEP Keys. You have to specify one of the 4 keys as default
Key which be used to encrypt wireless data transmission.
For example,
st access points and clients have the ability to hold up to 4 WEP keys
neously. You need to specify one of the 4 keys as default Key for data
o 64-bit WEP key (secret key) with 10 hexadecimal digits
126
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
