P-660 series Support Notes
0 wireless NIC card
utility will pop up on
Configuration for Wireless Station B
To configure Ad hoc mode on your ZyAIR B-100/B-200/B-30
please follow the following step.
1. Double click on the utility icon in your windows task bar the
your windows screen.
2. Select configuration tab.
3. Select Ad hoc from the operation mode pull down menu, fill you an SSID and
4. Since there is no DHCP server to give the host IP you must first designate a static
IP f
Connec
select a channel you want to use than press OK to apply.
or your station. From Windows Start select Control Panel >Network
tion>Wireless Network Connection.
115
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
