P-660 series Support Notes
Edit IP
Alias
Toggle to 'Yes' to enter menu 3.2.1 for setting up the second and third networks.
2. Edit the second and third networks in menu 3.2.1 by configuring the P-660's second
and third LAN IP addresses.
Menu 3.2.1 - IP Alias Setup
IP Alias 1= Yes
IP Address= 192.168.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
IP Alias 2= Yes
IP Address= 192.168.3.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
Enter here to CONFIRM or ESC to CANCEL:
Key Settings:
IP Alias 1
Toggle to 'Yes' an
create the second route in
d enter the second LAN IP address for the P-660. This will
the enif0:0 interface.
IP Alias 2
Toggle to 'Ye
the third ro
s' and enter the third LAN IP address for the P-660. This will create
ute in the enif0:1 interface.
uting
11. Using IP Policy Ro
• What is IP Policy Routing (IPPR)?
94
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
