P-660 series Support Notes
My Password= ********
Idle Timeout (sec)= 0
Address Assignment= Dynamic IP
IP Address= N/A
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Option Description
Encapsulation
Select the correct Encapsulation type that your ISP supports. For example,
RFC 1483.
Multiplexing
Select the correct Multiplexing type that your ISP supports. For example
LLC.
,
VPI & VCI Specify a VPI (Virtual Path entifier) and a VCI (Virtual Channel Identifier)
Id
number given to you by your ISP.
Single User
Set to Yes if you only have a single IP account for sharing with local
ers. Account comput
IP Address
Set to Dynamic if the ISP provides the IP for the P-660 dynamically.
.
Assignment
Otherwise, set to Static and enter the IP in the following IP Address field
IP Address
This field can not be configured if the ISP provides the IP for the P-660
dynamically. Otherwise, enter the IP that the ISP gives to you.
3. Setup the P-660 as a DHCP Relay
as
e LAN clients. When it is configured as
What is DHCP Relay?
DHCP stands for Dynamic Host Configuration Protocol. In addition to the DHCP
server feature, the P-660 supports the DHCP relay function. When it is configured
DHCP server, it assigns the IP addresses to th
DHCP relay, it is responsible for forwarding the requests and responses negotiating
between the DHCP clients and the server. See figure 1.
31
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
