P-660 series Support Notes
uncheck 'ASCII' field for
ed by '0x'.
or example,
Key2= 5y7js
Key3= 24fg7
Key4= 98jui
64-bits with hexadecimal digits WEP key :
Key1= 123456789A
Key2= 23456789AB
Key3= 3456789ABC
Key4= 456789ABCD
5. Site Survey
• Site survey introduction
• Preparation
• Survey on site
Introduction
What is Site Survey?
An RF site survey is a MAP to RF contour of RF coverage in a particular
facility. With wireless system it is very difficult to predict the propagation of radio
waves and detect the presence of interfering signals. Walls, doors, elevator shafts,
and other obstacles offer different degree of attenuation. This will cause the RF
coverage pattern be irregular and hard to predict.
Site survey can help us overcome these problem and even provide us a map of RF
coverage of the facility.
Preparation
Below are the steps to complete a simple site survey with simple tools.
. First you will need to obtain a facility diagram, such as blueprints. This is for you
Check 'ASCII' field for characters WEP key or
Hexadecimal digits WEP key.
Hexadecimal digits don't need to preced
F
64-bits with characters WEP key :
Key1= 2e3f4
1
to mark and take record on.
132
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
