ZyXEL Communications P-660R-T1 - IP Related Commands

P-660 series Support Notes
mode: 1: turn off receiving
2: receive only packets of this
interface
3: mode 2+ broadcast
5: mode 2 + multicast
6: all packets
status <ch_name> see LAN status
init <ch_name> initialize LAN
version see ethernet device type
pkttest
disp
packet <level> set ether test packet display level
event <ch> [on|off] turn on/off ether test event
display
sap [ch_name] send sap packet
arp <ch_name> <ip-addr> send arp packet to ip-addr
mem <addr> <data> [type] write memory data in address
test <ch_id> <test_id> [arg3]
[arg4]
do LAN test
pncconfig <ch_name> do pnc config
mac <src_ch> <dest_ch>
<ipaddr>
fake mac address
4. IP Related Commands
<hostid> format : xxx.xxx.xxx.xxx (ip Address)
<ether addr> format : xx:xx:xx:xx:xx:xx
<iface> : enif0, wanif0
<gw> : gateway ip address
Command Description
ip
address [addr] display host ip address
loopbackaddr <IP1> [IP2] Set loopback address.
alias <iface>
alias iface
aliasdis <0|1> disable alias
arp
status <iface> display ip arp status
add <hostid> ether <ether addr> add arp information
resolve <hostid> resolve ip-addr
drop <hostid> [hardware] drop arp
174
All contents copyright © 2005 ZyXEL Communications Corporation.