ZyXEL Communications P-660R-T1 - Bridge Related Command

P-660 series Support Notes
[protocol2] ?
disp display the fsm data
clear clear the fsm data
Struc dump fsm data structure
delay [inteval] set the delay timer for
sending first PPP
packet after call
answered
7. Bridge Related Command
Command Description
bridge
mode <1/0>
(enable/disable)
turn on/off (1/0) LAN
promiscious mode
blt related to bridge local
table
Disp <channel> display blt data
reset <channel> reset blt data
traffic display local LAN
traffic table
monitor [on|off] turn on/off traffice
monotor. Default is
off.
Time <sec> set blt re-init interval
brt related to bridge route
table
Disp [id] display brt data
reset [id] reset brt data
cnt related to bridge
routing statistic table
Disp display bridge route
counter
clear clear bridge route
counter
stat related to bridge packet
statistic table
Disp display bridge route
packet counter
Clear clear bridge route
packet counter
disp display bridge source
table
186
All contents copyright © 2005 ZyXEL Communications Corporation.