P-660 series Support Notes
5. When you reach the farthest point of connection mark the spot. Now you move
the access point to this new spot as have already determine the farthest point of the
access point installation spot if wireless service is required from corner of the room.
. Repeat step 1~5 and now you should be able to mark an RF coverage area as
completion you will have an
diagram and information of site survey. As illustrated below.
6
illustrated in above picutre.
7. You may need more than one access point is the RF coverage area have not cover
all the wireless service area you needed.
8. Repeat step 1~6 of survey on site as necessary, upon
134
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
