ZyXEL Communications P-660R-T1 - Page 180

P-660 series Support Notes
<iface> leave <group> leave a group on iface
<iface> query send query on iface
<iface> rsptime [time] set igmp response time
<iface> start turn on of igmp on iface
<iface> stop turn off of igmp on iface
<iface> ttl <threshold> set ttl threshold
<iface> v1compat [on|off] turn on/off v1compat on
iface
robustness <num> set igmp robustness
variable
status dump igmp status
pr
clear clear ip pr table counter
information
disp dump ip pr table counter
information
switch turn on/off ip pr table
counter flag
nat
timeout
gre [timeout] set nat gre timeout value
iamt [timeout] set nat iamt timeout value
generic [timeout] set nat generic timeout
value
reset [timeout] set nat reset timeout value
tcp [timeout] set nat tcp timeout value
tcpother [timeout] set nat tcp other timeout
value
update create nat system
information from
spSysParam
iamt display nat iamt
information
iface <iface> show nat status of an
interface
lookup <rule set> display nat lookup rule
new-lookup <rule set> display new nat lookup
rule
loopback [on|off] turn on/off nat loopback
flag
reset <iface> reset nat table of an iface
server
disp display nat server table
179
All contents copyright © 2005 ZyXEL Communications Corporation.