ZyXEL Communications P-660R-T1 - Page 192

P-660 series Support Notes
191
All contents copyright © 2005 ZyXEL Communications Corporation.
<set#> name> set
default-permit
<forward|block>
Edit whether a
packet is dropped
or allowed when it
does not match the
default set
icmp-timeout
<seconds>
Edit the timeout
for an idle ICMP
session before it is
terminated
udp-idle-timeout
<seconds>
Edit the timeout
for an idle UDP
session before it is
terminated
connection-timeout
<seconds>
Edit the wait time
for the SYN TCP
sessions before it
is terminated
fin-wait-timeout
<seconds>
Edit the wait time
for FIN in
concluding a TCP
session before it is
terminated
tcp-idle-timeout
<seconds>
Edit the timeout
for an idle TCP
session before it is
terminated
pnc <yes|no> PNC is allowed
when 'yes' is set
even there is a rule
to block PNC
log <yes|no> Switch on/off
sending the log for
matching the
default permit
rule <rule#> permit <forward|block> Edit whether a
packet is dropped
or allowed when it
matches this rule
active <yes|no> Edit whether a rule
is enabled or not
protocol <0~255> Edit the protocol
number for a rule.