P-660 series Support Notes
1 in Menu 15.1. Enter 1 to bring up this menu. Now let's look at Option
Menu 15.1.1 - Address Mapping Rules
Set Name= ?
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- ------
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Action= Edit , Select Rule= 0
Press ENTER to Confirm or ESC to Cancel:
We will ju te that, this screen is
not re No that the [?] in
d you mu r a name for
e set. Th The Type, Local and
Glob l values
are displayed here.
st look at the differences from the previous menu. No
ad on
t Nam
ly, so we have extra Action and Select Rule fields.
e field means that this is a required field an
t also
st entethe Se
th e description of the other fields is as described above.
rt/End IPs are configured in Menu 15.1.1 (describedal Sta ater) and the
Field Description Option
Set Name
note that
Enter a name for this set of rules. This is a required field. Please
if this field is left blank, the entire set will be deleted.
Rule1
Action
They are 4 actions. The default is Edit. Edit means you want to edit
a selected rule (see following field). Insert Before means to insert a
new rule before the rule selected. The rule after the selected rule will
then be moved down by one rule. Delete means to delete the
selected rule and then all the rules after the selected one will be
advanced one rule. Save Set means to save the whole set (note w
Edit
Insert Before
Delete
hen
Save Set
you choose this action the Select Rule item will be disabled).
Select Rule
When you choose Edit, Insert Before or Save Set in the previous
field the cursor jumps to this field to allow you to select the rule to
apply th
1
e action in question.
Note: Save Set in the Action field means to save the whole set. You must do this if
you make any changes to the set-including deleting a rule. No changes to the set take
48
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
