P-660 series Support Notes
Menu 4 - Internet Access Setup
ISP's Name= CHT
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
ATM QoS Type= CBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Static
IP Address= IGA3
Network Address Translation= Full Feature
Address Mapping Set= 1
Press ENTER to Confirm or ESC to Cancel:
Step 2:
Go to menu 15.1 and choose 1 (not 255, SUA this time) to begin configuring this new
set. Enter a Set Name, choose the Edit Action and then select 1 from Select Rule
field. Press [ENTER] to confirm. See the following setup for the four
case.
Rule 1 Setup: Select One-to-One type to map the FTP Server 1 with I
(192.168.1.10) to IGA1.
rules in our
LA1
Menu 15.1.1.1 - - Rule 1
Type: One-to-One
Local IP:
Start= 192.168.1.10
End = N/A
Global IP:
Start= [Enter IGA1]
End = N/A
Press ENTER to Confirm or ESC to Cancel:
55
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
