ZyXEL Communications P-660R-T1 - Page 65

P-660 series Support Notes
Menu 3.1:
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Menu 11.1:
Menu 11.1 - Remote Node Profile
Rem Node Name= LAN Route= IP
Active= Yes Bridge= No
Encapsulation= PPP Edit PPP Options= No
Incoming: Rem IP Addr= ?
Rem Login= test Edit IP/IPX/Bridge= No
Rem Password= ********
Outgoing: Session Options:
My Login= testt Edit Filter Sets= Yes
My Password= *****
Authen= CHAP/PAP
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
SMT will also prevent you from enter
to the device filters field in Menu 3
protocol filters field. Even though SM
entered in ZyNOS, it is unable to res
ing a protocol filter set configured in Menu 21
.1, 11.5, or entering a device filter set to the
T will prevent the inconsistency from being
olve the intermixing problems existing in the
64
All contents copyright © 2005 ZyXEL Communications Corporation.