P-660 series Support Notes
ort, TOS and precedence (fields in the IP header) and length. The inclusion of
tive and bulk traffic. Interactive
hile bulk traffic, e.g., file
ket to a different gateway (and
nce fields in the IP header.
y of ZyNOS in style and in
re divided into sets, where related policies are grouped
olicies before applying them to an interface or a remote
s. There are 12 policy sets with 6 policies in
• Setup the IP Policy Routing
p
length criterion is to differentiate between interac
applications, e.g., Telnet, tend to have short packets, w
transfer, tends to have large packets.
The actions that can be taken include routing the pac
hence the outgoing interface) and the TOS and precede
IPPR follows the existing packet filtering facilit
implementation. The policies a
together. A use defines the p
node, in the same fashion as the filter
each set.
1. Create a routing policy set in menu 25
Menu 25 - IP Routing Policy Setup
Policy Policy
Set # Name Set # Name
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Policy Set Number to Configure= 1
Edit Name= policy1
Press ENTER to Confirm or ESC to Cancel:
2. Edit a rule or more for this set in m
enu 25.1.1. See an example below.
Menu 25.1.1 - IP Routing Policy
Policy Set Name= First
Active= Yes
96
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
