Chapter 4 Easy Mode
ZyWALL USG Series User’s Guide
136
Select Enable Wi-Fi Network if you want wireless devices to be able to wirelessly access the Zyxel Device
and all resources connected to the Zyxel Device. Configure a descriptive name of from 1 to 32 alpha-
numeric characters, hyphens or underscores (a-z A-Z 0-9 -_) for the wireless network name (Wi-Fi). Set a
Password of between 8 and 63 printable ASCII characters (including spaces and symbols) or 64
hexadecimal characters (0-9 a-f) that wireless users will have to enter for access to the Zyxel Device
wireless network.
Select Enable Guest Wi-Fi Network if you want wireless devices to only be able to wirelessly access the
Internet via the Zyxel Device for up to the period specified in Duration. Configure a descriptive name of
from 1 to 32 alpha-numeric characters, hyphens or underscores (a-z A-Z 0-9 -_) for the wireless network
name (Wi-Fi). Set a Password of between 8 and 63 printable ASCII characters (including spaces and
symbols) or 64 hexadecimal characters (0-9 a-f) that wireless users will have to enter for access to the
Zyxel Device Guest wireless network.
The Guest Wi-Fi Network allows Internet access for up to the period specified in Duration. Wireless users
will have to log in again if the time has elapsed.
The Zyxel Device uses WPA2-PSK with AES encryption so wireless clients must be able to support AES
encryption to wirelessly connect to the Zyxel Device using WPA2-PSK.
4.10.1 Guest LAN (Wired Network)
Figure 107 Wi-Fi and Guest Network Setup
To Next Page
Loading...
