Chapter 43 Object
ZyWALL USG Series User’s Guide
834
43.5.2 Add/Edit ZyMesh Profile
This screen allows you to create a new ZyMesh profile or edit an existing one. To access this screen, click
the Add button or select and existing profile and click the Edit button.
Figure 574 Configuration > Object > ZyMesh Profile > Add/Edit ZyMesh Profile
The following table describes the labels in this screen.
43.6 Application
Go to Configuration > Licensing > Signature Update > IDP/AppPatrol to check that you have the latest
IDP and App Patrol signatures. These signatures are available to create application objects in
Configuration > Object > Application > Application. Categories of applications include (at the time of
writing):
Profile Name This field indicates the name assigned to the profile.
ZyMesh SSID This field shows the SSID specified in this ZyMesh profile.
Table 314 Configuration > Object > ZyMesh Profile (continued)
LABEL DESCRIPTION
Table 315 Configuration > Object > ZyMesh Profile > Add/Edit ZyMesh Profile
LABEL DESCRIPTION
Profile Name Enter up to 31 alphanumeric characters for the profile name.
ZyMesh SSID Enter the SSID with which you want the managed AP to connect to a root AP or repeater to
build a ZyMesh link.
Note: The ZyMesh SSID is hidden in the outgoing beacon frame so a wireless
device cannot obtain the SSID through scanning using a site survey tool.
Pre-Shared Key Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
The key is used to encrypt the wireless traffic between the APs.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
Table 316 Categories of Applications
• Instant Messaging • P2P • File Transfer
• Streaming Media • Mail and Collaboration • Voice over IP
To Next Page
Loading...
