Chapter 45 Log and Report
ZyWALL USG Series User’s Guide
974
45.3.4 Edit Remote Server Log Settings
The Log Settings Edit screen controls the detailed settings for each log in the remote server (syslog). Go
to the Log Settings Summary screen (see Section 45.3.1 on page 966), and click a remote server Edit
icon.
Selection Select what information you want to log from each Log Category (except All Logs; see below).
Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this category
enable normal logs and debug logs (yellow check mark) - log regular information, alerts, and
debugging information from this category
OK Click this to save your changes and return to the previous screen.
Cancel Click this to return to the previous screen without saving your changes.
Table 395 Configuration > Log & Report > Log Setting > Edit (USB Storage) (continued)
LABEL DESCRIPTION
To Next Page
Loading...
