Chapter 38 IDP
ZyWALL USG Series User’s Guide
721
38.2.4 Add Profile > Query View
In the group view screen, click Switch to query view to search for signatures by criteria such as Name, ID,
Severity, Policy Type, Platform, Service, Platforms, or actions.
Log To edit an item’s log option, select it and use the Log icon. These are the log options:
no: Select this option on an individual signature or a complete service group to have the Zyxel
Device create no log when a packet matches a signature(s).
log: Select this option on an individual signature or a complete service group to have the Zyxel
Device create a log when a packet matches a signature(s).
log alert: An alert is an e-mailed log for more serious events that may need more immediate
attention. Select this option to have the Zyxel Device send an alert when a packet matches a
signature(s).
Action To edit what action the Zyxel Device takes when a packet matches a signature, select the
signature and use the Action icon.
none: Select this action on an individual signature or a complete service group to have the
Zyxel Device take no action when a packet matches the signature(s).
drop: Select this action on an individual signature or a complete service group to have the
Zyxel Device silently drop a packet that matches the signature(s). Neither sender nor receiver
are notified.
reject-sender: Select this action on an individual signature or a complete service group to have
the Zyxel Device send a reset to the sender when a packet matches the signature. If it is a TCP
attack packet, the Zyxel Device will send a packet with a ‘RST’ flag. If it is an ICMP or UDP
attack packet, the Zyxel Device will send an ICMP unreachable packet.
reject-receiver: Select this action on an individual signature or a complete service group to
have the Zyxel Device send a reset to the receiver when a packet matches the signature. If it is
a TCP attack packet, the Zyxel Device will send a packet with an a ‘RST’ flag. If it is an ICMP or
UDP attack packet, the Zyxel Device will do nothing.
reject-both: Select this action on an individual signature or a complete service group to have
the Zyxel Device send a reset to both the sender and receiver when a packet matches the
signature. If it is a TCP attack packet, the Zyxel Device will send a packet with a ‘RST’ flag to the
receiver and sender. If it is an ICMP or UDP attack packet, the Zyxel Device will send an ICMP
unreachable packet.
# This is the entry’s index number in the list.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
SID Type the exact signature ID (identification) number that uniquely identifies a Zyxel Device IDP
signature.
Log These are the log options. To edit this, select an item and use the Log icon.
Action This is the action the Zyxel Device should take when a packet matches a signature here. To edit
this, select an item and use the Action icon.
OK A profile consists of three separate screens. If you want to configure just one screen for an IDP
profile, click OK to save your settings to the Zyxel Device, complete the profile and return to the
profile summary page.
Cancel Click Cancel to return to the profile summary page without saving any changes.
Save If you want to configure more than one screen for an IDP profile, click Save to save the
configuration to the Zyxel Device, but remain in the same page. You may then go to another
profile screen (tab) in order to complete the profile. Click OK in the final profile screen to
complete the profile.
Table 260 Configuration > UTM Profile> IDP > Profile > Add > Group View (continued)
LABEL DESCRIPTION
To Next Page
Loading...
