Chapter 19 DNS Inbound LB
ZyWALL USG Series User’s Guide
488
19.2.2 The DNS Inbound LB Add/Edit Member Screen
The Add Load Balancing Member screen allows you to add a member interface for the DNS load
balancing rule. Click Configuration > Network > DNS Inbound LB > Add or Edit and then an Add or Edit
icon to open this screen.
Figure 350 Configuration > Network > DNS Inbound LB > Add/Edit > Add
The following table describes the labels in this screen.
IP Address This field displays the IP address of the member interface.
Monitor Interface This field displays the name of the member interface. The Zyxel Device manages load
balancing between the member interfaces.
Weight This field is available if you selected Weighted Round Robin as the load balancing
algorithm. This field displays the weight of the member interface. An interface with a
larger weight gets more chances to transmit traffic than an interface with a smaller
weight.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving.
Table 168 Configuration > Network > DNS Inbound LB > Add/Edit (continued)
LABEL DESCRIPTION
Table 169 Configuration > Network > DNS Inbound LB > Add/Edit > Add/Edit
LABEL DESCRIPTION
Member The Zyxel Device checks each member interface’s loading in the order displayed here.
Monitor Interface Select an interface to associate it with the DNS load balancing rule. This field also displays
whether the IP address is a static IP address (Static), dynamically assigned (Dynamic) or
obtained from a DHCP server (DHCP Client), as well as the IP address and subnet mask.
Weight This field is available if you selected Weighted Round Robin for the load balancing
algorithm.
Specify the weight of the member interface. An interface with a larger weight gets more
chances to transmit traffic than an interface with a smaller weight.
IP Address
Same as Monitor
Interface
Select this to send the IP address displayed in the Monitor Interface field to the DNS query
senders.
Custom Select this and enter another IP address to send to the DNS query senders.
To Next Page
Loading...
