ZyWALL USG Series User’s Guide
566
CHAPTER 26
Advertisement Screen
26.1 Advertisement Overview
Use this screen to set the Zyxel Device to display an advertisement web page as the first web page
whenever the user connects to the Internet.
Click Configuration > Hotspot > Advertisement to display the screen.
Figure 400 Configuration > Hotspot > Advertisement
The following table gives an overview of the objects you can configure.
Table 202 Configuration > Hotspot > Advertisement
LABEL DESCRIPTION
Enable
Advertisement
Select this to turn on the advertisement feature.
Note: This feature works only when you enable web authentication.
Advertisement
Summary
Use this table to manage the list of advertisement web pages.
Add Click this to create a new entry. Select an entry and click Add to create a new entry after the
selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
# This field is a sequential value, and it is not associated with any entry.
To Next Page
Loading...
