Chapter 38 IDP
ZyWALL USG Series User’s Guide
716
38.2.1 Base Profiles
The Zyxel Device comes with several base profiles. You use base profiles to create new profiles. In the
Configuration > UTM > IDP > Profile screen, click Add to display the following screen.
Clone Use Clone to create a new entry by modifying an existing one.
• Select an existing entry.
• Click Clone.
• A configuration copy of the selected entry pops up. You must at least change the
name as duplicate entry names are not allowed.
# This is the entry’s index number in the list.
Name This displays the name of the IDP Profile.
Base Profile This displays the base profile used to create the IDP profile.
Description This displays the description of the IDP Profile.
Reference This displays the number of times an object reference is used in a profile.
Service You need to create an account at myZyxel, register your Zyxel Device and then
subscribe for IDP in order to be able to download new packet inspection signatures from
myZyxel. There’s an initial free trial period for IDP after which you must pay to subscribe
to the service. See the Registration chapter for details.
Service Status This field displays whether a service license is enabled at myZyxel (Activated) or not (Not
Activated) or expired (Expired). It displays the remaining Grace Period if your license has
Expired. It displays Not Licensed if there isn’t a license to be activated for this service.
If you need a license or a trial license has expired, click Buy to buy a new one. If a
Standard license has expired, click Renew to extend the license.
Then, click Activate to connect with the myZyxel server to activate the new license.
Service Type This field shows Trial, Standard or None depending on whether you subscribed to the IDP
trial, bought an iCard for IDP service or neither.
Signature Information The following fields display information on the current signature set that the Zyxel Device
is using.
Current Version This field displays the IDP signature set version number. This number gets larger as the set
is enhanced.
Signature Number This field displays the number of IDP signatures in this set. This number usually gets larger
as the set is enhanced. Older signatures and rules may be removed if they are no longer
applicable or have been supplanted by newer ones.
Released Date This field displays the date and time the set was released.
Update Signatures Click this link to go to the screen you can use to download signatures from the update
server.
Table 258 Configuration > UTM Profile > IDP > Profile (continued)
LABEL DESCRIPTION
To Next Page
Loading...
