Chapter 20 Web Authentication
ZyWALL USG Series User’s Guide
499
Figure 359 Configuration > Object > Auth. method > Edit
3 Click Configuration > Web Authentication. In the Web Authentication > General screen, select Enable
Web Authentication to turn on the web authentication feature and click Apply.
Figure 360 Configuration > Web Authentication
4 In the Web Authentication Policy Summary section, click the Add icon to set up a default policy that has
priority over other policies and forces every user to log into the Zyxel Device before the Zyxel Device
routes traffic for them.
5 Select Enable Policy. Enter a descriptive name, “default_policy” for example. Set the Authentication
field to required, and make sure Force User Authentication is selected. Select an authentication type
profile (“default-web-portal” in this example). Keep the rest of the default settings, and click OK.
Note: The users must log in at the Web Configurator login screen before they can use HTTP or
MSN.
To Next Page
Loading...
