Chapter 43 Object
ZyWALL USG Series User’s Guide
821
43.3.2.3 Security List
This screen allows you to manage wireless security configurations that can be used by your SSIDs.
Wireless security is implemented strictly between the AP broadcasting the SSID and the stations that are
connected to it.
To access this screen click Configuration > Object > AP Profile > SSID > Security List.
Note: You can have a maximum of 32 security profiles on the Zyxel Device.
Figure 566 Configuration > Object > AP Profile > SSID > Security List
The following table describes the labels in this screen.
Hidden SSID Select this if you want to “hide” your SSID from wireless clients. This tells any wireless clients in the
vicinity of the AP using this SSID profile not to display its SSID name as a potential connection.
Not all wireless clients respect this flag and display it anyway.
When an SSID is “hidden” and a wireless client cannot see it, the only way you can connect to
the SSID is by manually entering the SSID name in your wireless connection setup screen(s)
(these vary by client, client connectivity software, and operating system).
Enable Intra-BSS
Traffic Blocking
Select this option to prevent crossover traffic from within the same SSID.
Local VAP Setting This part of the screen only applies to Zyxel Device models that have built-in wireless
functionality (AP) - see Section 1.1 on page 28.
VLAN Support Select On to have the Zyxel Device assign the VLAN ID listed in the top part of the screen to the
built-in AP.
Select Off to have the Zyxel Device ignore the VLAN ID listed in the top part of the screen.
Select an Outgoing Interface to have the Zyxel Device assign an IP address in the same subnet
as the selected interface to the built-in AP.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
Table 307 Configuration > Object > AP Profile > SSID > Add/Edit SSID Profile (continued)
LABEL DESCRIPTION
Table 308 Configuration > Object > AP Profile > SSID > Security List
LABEL DESCRIPTION
Add Click this to add a new security profile.
Edit Click this to edit the selected security profile.
Remove Click this to remove the selected security profile.
References Click this to view which other objects are linked to the selected security profile (for example,
SSID profile).
# This field is a sequential value, and it is not associated with a specific profile.
To Next Page
Loading...
