Chapter 43 Object
ZyWALL USG Series User’s Guide
868
Figure 604 Configuration > Object > AAA Server > RADIUS > Add
The following table describes the labels in this screen.
Table 342 Configuration > Object > AAA Server > RADIUS > Add
LABEL DESCRIPTION
Name Enter a descriptive name (up to 63 alphanumerical characters) for identification purposes.
Description Enter the description of each server, if any. You can use up to 60 printable ASCII characters.
Server Address Enter the address of the RADIUS server.
Authentication
Port
Specify the port number on the RADIUS server to which the Zyxel Device sends authentication
requests. Enter a number between 1 and 65535.
Backup Server
Address
If the RADIUS server has a backup server, enter its address here.
Backup
Authentication
Port
Specify the port number on the RADIUS server to which the Zyxel Device sends authentication
requests. Enter a number between 1 and 65535.
Timeout Specify the timeout period (between 1 and 300 seconds) before the Zyxel Device disconnects
from the RADIUS server. In this case, user authentication fails.
Search timeout occurs when either the user information is not in the RADIUS server or the
RADIUS server is down.
NAS IP Address Type the IP address of the NAS (Network Access Server).
Case-sensitive
User Names
Select this if you want configure your username as case-sensitive.
To Next Page
Loading...
