Chapter 45 Log and Report
ZyWALL USG Series User’s Guide
981
Remote Server
1~4
For each remote server, select what information you want to log from each Log Category
(except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this category
enable normal logs and debug logs (yellow check mark) - log regular information, alerts, and
debugging information from this category
OK Click this to save your changes and return to the previous screen.
Cancel Click this to return to the previous screen without saving your changes.
Table 397 Configuration > Log & Report > Log Setting > Log Category Settings (continued)
LABEL DESCRIPTION
To Next Page
Loading...
