Installation manual 2N® IP Verso
•
•
•
•
•
•
•
•
•
RFID Card Reader 13.56 MHz, NFC Support
The 13.56 MHz RFID card reader (Part No.9155040) is one of the2N
®
IP Versointercom
elements and is used for reading RFID card Ids in the 13.56 MHz band.
The module contains two2N
®
IP Versobus connectors.
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read (only the card serial number is read):
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N
®
Mobile Key