2N IP Verso - General Drawings

Installation manual 2N® IP Verso
229 / 241
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Mechanical properties
Cover:robust zinc casting with surface finish(minor surface shade nuances are
acceptable)
91550XX – NICKEL
Material– Zamak 410– Zn95Al4Cu1
Surface treatment– Zn/Cu20/Ni25b max. 80 µm
91550XXB – BLACK 
Material– Zamak 410– Zn95Al4Cu1
Surface treatment–PUR Wet coating 15-25 µm, RAL 9005 Jet black
interior side - passivated zinc
Working temperature:−40 °C – 60 °C
Working relative humidity:10 % – 95 % (non-condensing)
Storing temperature:−40 °C – 70 °C
Dimensions
Surface mounting frame:
1 module: 107 (W) x 130 (H) x 28(D)mm
2 modules: 107 (W) x 234 (H) x 28(D)mm
3 modules: 107 (W) x 339 (H) x 28(D)mm
Flush mounting frame:
1 module: 130 (W) x 153 (H) x 5(D)mm
2 modules: 130 (W) x 257 (H) x 5(D)mm
3 modules: 130 (W) x 361 (H) x 5(D)mm
Flush mounting box (minimum hole dimensions):
1 module: 108 (W) x 131 (H) x 45 (D) mm
2 modules: 108 (W) x 238 (H) x 45 (D) mm
3 modules: 108 (W) x 343 (H) x 45 (D) mm
Module internal cutout:72 (W) x 89.3 (H) mm / 2.83 (W) x 3.51 (H) inches
Weight:max net weight: 2 kg / max gross weight: 2.5 kg – based on configuration
Covering level:IP54
Resistance level:IK08
4.1 General drawings
Surface mounting